The PCV valve on a 2002 Park Avenue is on the passenger side of the engine. It is close to the manifold under the map sensor.
The PCV valve on a 1995 Buick Park Avenue is located on the top of the valve cover. Twist the valve and pull to remove and replace it.
in the passenger wheelwell, take off the tire
Hey Chris==It is in the right valve cover. There should be a hose from it to the intake or carb. GoodluckJoe
on the left side of intake manifold under MAP sensor.
were heater control valve for 1996 buick park avenue
Check the Park Avenue EGR valve for a clog. A clogged valve can cause a rough idle and stall at a light.
There is no EGR valve on the '92
My 1998 Park Avenue stalled. I cleaned the idle air control valve (IAC) and now it is fine.
EGR Valve
Remove headlight assembly to access bulb/socket.
The PVC valve is located at the left side rear of the intake manifold under a flat metal plate cover held in place with three screws.
Park Avenue is one of the two most expensive properties on the board, they're located just before the Go square. Park Avenue is the cheaper one of the two, 3 spaces before Go.