You should be able to find it in the valve cover or intake manifold. It's got an "L" (elbow") shape slip-on pipe connection, to which a rubber PCV hose attaches. The PCV valve sits in a rubber grommet, which fits into the port on the valve cover (or intake manifold). It's recommended that the grommet be changed at the same time as the PCV valve, since it'll most likely be old, dry, and brittle if it's never been changed.
Hi- your pcv valve is located right in the center of the valve cover (usually black cover that says Honda on it)
The PCV valve on your car is mounted on the valve cover and has a rubber hose that is connected to the fresh air intake.
where is the pcv valve locate on 95 Honda passport
86 prelude pcv locationThe 1986 1987 Honda prelude pcv valve is in the middle under the intake. It has a hose running through an opening on the intake. It is only accessible by removing the intake. The intake is very hard to remove in the carbecause the bottom bolts are so hard to get to.
PCV valve (A)
a new one? one that fits.. the hose itself sould be between your intake and valve cover
pcv valve replace every 30000 miles.. bad oil pan gasket, or valve cover gasket
Pcv valve job on 95 civic
corvette 1994
The 97 Honda VTec PCV valve should be on the valve cover. The valve is a plug-in type and just pulls free.
valve cover
The PCV Valve is located in the Vaccum line above the alternator.