I just had mine fixed. I asked the mechanic where it was and he said behind the exhaust and the #4 cylinder. I don't know anything about cars but he showed me a hose that had collapsed because I needed to change the pcv valve. He said that is hard on an engine and he said I would get better gas mileage and oil useage because of changing it.
Locate pcv valve on 1995 ford contour
Where is the PCV valve located on a 4 cyl ford contour and will this if replaced will let my service engine light go off?
Under the mass air flow by where the belt is
on a 1998 Pontiac gan am ,they do not have a pcv valve.
Where is pcv valve on 1998 daewoo leganza
The pcv valve is on the passenger side valve cover
The 1998 Cavalier does have a PCV valve. The valve is in the side of the valve cover, held in by a metal ring.
the pcv valve is located on top of the valve cover
On the 1998 Ford Explorer Sport with 4.6L V8 the positive crankcase ventilation (PCV) will be located on the driver's side of the vehicle. On top of the front-left engine valve cover will be a grommet and hose assembly. In between the grommet and hose, and attached to the valve cover is the PCV valve.
I have a 1998 Ford Escort ZX2 and the PCV valve was located to the right of the exhaust heat shield in front of the engine block. All I had to do was pull the rubber elbow out that was connected to the PCV valve and then pull the valve out. It was arguably the easiest maintenance work I've done on a car. I didn't have to take apart the heat shield or any other component.
The PCV valve on 1992 ford mustang 5.0 is on the drivers side.
PCV valve located on a 2003 ford f150 4.2?
Did you ever find the location of the pcv valve?
where is the pcv valve on a 2007 ford sport trac
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
# The PCV valve is located in the valve cover # Detach the hose from the valve then unscrew the valve from the valve cover
The PCV valve for a 1998 Monte Carlo should plug into the valve cover. Twist and pull it to remove and replace it.
The 1998 and newer S10 with the 2.2L engine does not have a serviceable pcv valve.
The PCV valve on a 3.0 Ford Taurus is on top of the engine. Valve is at the front of the engine and is easily accessible.
The 1995 Ford Ranger 3.0 liter engine PCV valve can be found on the top of the engine. The PCV valve will be on the back side of the air cleaner.
The most common place for a PCV valve is on the valve cover.
The PCV valve, on your Ford Ranger 2.5 liter engine, is located on the outside of the air cleaner housing. The valve is on the back of the housing.
The PCV valve on a 2004 Ford Taurus should be on the left side of the engine. It plugs into the valve cover at the rear of the cover.
depends on engine most times in back on to of engine
back right valve cover See "Related Questions" below for more