slave is on passenger side near your starter// follow the line from the master cylinder if you get under the truck behind the front passenger wheel you won't be able to miss it.
It is straight underneath the starter
slave cylinder is located on the starter passenger side of vehicle. it should be attached to the transmission by 2 nuts.
Under the truck, behind the driver.
There is NO adjustment, You must replace the clutch set to bring the pedal back to the right position. You also need to make sure the clutch slave cylinder/ master cylinder is good before replacing clutch assy.
You CAN"T. If you are having clutch problems then it is time for aNEW clutch kit and clutch slave cylinder too. NO ADJUSTMENT
123456
Sure, You will have to change everything,motor mounts,computer,wire harness, exhaust, etc...
firewall 8 - 7 6 - 5 4 - 3 2 - 1 front
approx 4 quarts
Remove the retaining ring from the top of your 1997 Chevrolet 1500 ignition cylinder. Slide the ignition cylinder out and remove the wiring harness.
in the fuel tank
The starter solenoid on a 1998 Chevy 1500 is located on the starter. It is on the top with a positive cable connecting it to the starter.