slave is on passenger side near your starter// follow the line from the master cylinder if you get under the truck behind the front passenger wheel you won't be able to miss it.
It is straight underneath the starter
slave cylinder is located on the starter passenger side of vehicle. it should be attached to the transmission by 2 nuts.
On a 1992 Chevy 1500, the hydraulic clutch bleeder is typically located on the slave cylinder, which is mounted on the transmission. You can find the bleeder valve on the top or side of the slave cylinder. To access it, you may need to lift the vehicle and remove any obstacles, such as heat shields or protective covers, that obstruct your view. Be sure to use the appropriate tools to prevent damaging the bleeder valve.
Under the truck, behind the driver.
There is NO adjustment, You must replace the clutch set to bring the pedal back to the right position. You also need to make sure the clutch slave cylinder/ master cylinder is good before replacing clutch assy.
You CAN"T. If you are having clutch problems then it is time for aNEW clutch kit and clutch slave cylinder too. NO ADJUSTMENT
On a Chevy CK 1500 with a 6-cylinder engine, the thermostat is typically located on the engine block, near the top of the engine, under the housing connected to the upper radiator hose. To access it, you'll generally need to remove the thermostat housing, which is secured by bolts. Make sure to drain the coolant before attempting to replace the thermostat to avoid spills.
123456
Sure, You will have to change everything,motor mounts,computer,wire harness, exhaust, etc...
firewall 8 - 7 6 - 5 4 - 3 2 - 1 front
approx 4 quarts
Remove the retaining ring from the top of your 1997 Chevrolet 1500 ignition cylinder. Slide the ignition cylinder out and remove the wiring harness.