It is straight underneath the starter
123456
no
slave is on passenger side near your starter// follow the line from the master cylinder if you get under the truck behind the front passenger wheel you won't be able to miss it.
A 1993 Chevy does not have a carburetor, it is fuel injected.
The tire size should be P235-75R -15. I have a 1998 Chevy Cheyenne 1500 4x4. Tire size is 265-75R-16
To change the master cylinder on a 1993 Chevy Cheyenne 1500 pickup with a hydraulic clutch, first, disconnect the negative battery terminal. Then, remove the clutch fluid reservoir cap and drain the fluid. Unbolt the master cylinder from the firewall, disconnect the push rod from the clutch pedal, and remove the hydraulic lines. Install the new master cylinder by reversing these steps, ensuring all connections are secure and refill the reservoir with the appropriate hydraulic fluid.
1500
There is NO adjustment, You must replace the clutch set to bring the pedal back to the right position. You also need to make sure the clutch slave cylinder/ master cylinder is good before replacing clutch assy.
It is inside of the fuel tank.
You CAN"T. If you are having clutch problems then it is time for aNEW clutch kit and clutch slave cylinder too. NO ADJUSTMENT
i have a 94 cheyenne c 1500 4.3 v6 and it has a vortec
slave cylinder is located on the starter passenger side of vehicle. it should be attached to the transmission by 2 nuts.