There's 3 on that truck. You have 1 in behind both front brake rotors and 1 on the transmission tail shaft.
NO it must have it.
first step you must removed the tire then the brakes then the four 15mm bolts head then you can access the abs sensor then reversed to install it
abs sensors are at the axle hub
Bring to a shop that has an ABS scanner to determine problem
The 2002 Chevrolet Suburban ABS relay switch can be found on the firewall in the engine compartment. The ABS relay switch will be on the drivers side of the firewall.
When my 2003 suburban did it. It turned out to be bearings. After replacing the bearings, no problems since. The bearing assembly has abs sensor attached.
No, an abs sensor will only affect antilock braking.
Need to know what year
they are inside the front wheel hubs, on both sides.
get your rotors turned. If it's the ABS turning on or off you might need a new sensor for the wheel. The S-10 ABS had a design flaw and the ABS sensors on the wheel sometimes break.
In the back end of the transmission.
The ABS sensor on ALL year Chevy Venture vans is located in the hub on the Left and right front tires. If the sensor is failing you unfortunately have to replace the entire hub. The barrings and the sensor are all sealed inside the hub. The ABS electrical connector is just behind the hub under the CV axle.