0
What else can I help you with?
Where is the abs relay located on a Chevy 2002 astro van?
There is no ABS relay on a Chevy 2002 Astro Van. If the ABS light is on it is indicating a problem with the vehicle that should be checked out.
What does it cost to replace abs module for a 2002 Chevy suburban at the Chevy dealer?
The part is approximately $920 from the dealer - that is just the ABS module and not the pump too. Installation will vary depending on your shop rates.
Where are the ABS sensors on a 1999 Chevy Suburban and how do you clean or replace them?
abs sensors are at the axle hub
Where to find abs relay module on 04 2500 hd chevy pu?
location of ABS relay module for 04 2500HD pu
What causes Chevy 2002 Suburban ABS Pump runs continuosly?
Had same problem, you have to replace the ABS Module. You can take it to the mechanic for about $1,200+ or this web site http://cgi.ebay.com/ebaymotors/GM-CHEVY-PU-SUV-ABS-EBCM-COMPUTER-ECU-MODULE-REBUILD-/390263833938?pt=Motors_Car_Truck_Parts_Accessories&hash=item5add898552
Where is the abs pump motor relay located on a 90 Chevy Astro?
The ABS pump relay is intergrated into the EHCU (elecro-hydraulic control Unit) and it is not serviceable. If the ABS pump relay is defective, the entire control unit must be replaced.
Does a 2002 Chevy Malibu have abs brake system?
Yes, the 2002 Malibu has an ABS system with sensors at all four wheels.
Where is ABS relay located 96 Chevy Blazer?
dont think it has one, or dose it,
Where is the abs module located on a 2002 Chevrolet Suburban?
It is located at the chassis under the driver side.
How do you decompress or disconnect the ABS on a 2002 Ford Explorer?
If you want to just disable the ABS then you can pull out the fuse for the ABS relay. The only thing is the ABS light will show on the dash.
Why do your 2002 Chevy suburban antilock brakes activate when coming to a slow stop on dry pavement?
Answer noted on another website (Search on: antilock brakes 2002 Avalanche): Person reported exact same problem with a 2002 Chevy Avalanche and had already changed both front wheel speed sensors, the rear wheel speed sensor in the transmission, and master cylinder with no fix. Answer provided by a Chevy Technician was: Similar problem noted on a 2002 Suburban. You'll need to check all of the ABS reluctor rings on the front wheel bearings and in the rear. The one that "he" worked on had a loose reluctor ring on the right front hub, causing the ABS to intermittently activate when coming to a stop.
How do you replace abs brakes on 2002 Chevy s10?
You replace the brakes on an ABS S10 the same way you replace brakes on a non ABS S10.
