Want this question answered?
A 4 wheel abs would have sensor wires running to the front wheel bearings.A 4 wheel abs would have sensor wires running to the front wheel bearings.
Have 1996 ranger4wd front abs sensor frozen on spindle any suggestions
If you have a RWD Expedition, I see two different part numbers for front left and right abs wheel speed sensors. If you have 4WD the front wheel speed sensors are the same.
There are two speed sensors on the front of the transmission and one abs wheel speed sensor at each wheel bearing.There are two speed sensors on the front of the transmission and one abs wheel speed sensor at each wheel bearing.
Wheel speed or ABS sensor's are located on the suspension Knuckle Front and Rear.
No, but they all do have a speed sensor on the left front hub.
if you have wiring going to a sensor near the front wheel bearings, you have four wheel abs.if you have wiring going to a sensor near the front wheel bearings, you have four wheel abs.
The new wheel bearing includes the ABS sensor. They are not available separately.
Could be a bad wheel bearing
abs sensor
Look for speed sensor wiring at the front wheel bearings. If you have front speed sensors, you have abs.
Do you really want an amateur, such as yourself, working on something as vital as your Anti-Lock Brake System, (ABS)? Take it to a professional. On 4WD models the front ABS are not serviceable, because the front wheel indicator rings are integrated with the front wheel bearings. On 2WD models the front ABS sensor is mounted in the steering knuckle which are pressed onto the wheel hubs. The rear wheel sensor is mounted on the rear axle housing. This information is for later than 1994 models.