0
What else can I help you with?
Is a 1996 Pontiac sunfire 2.2 engine the same as a 1999 Chevy cavalier 2.2 engine?
no they have slightly different head/intake setups, but the blocks should be interchangeable.
How do you repair P0113 problem on a 1997 Pontiac sunfire?
Trouble code P0113 means: Intake Air Temperature Sensor 1 Circuit High Input
Where is the coil pack on a 2000 Pontiac Sunfire?
The coil pack on a 2000 Pontiac Sunfire is located behind the air intake hose. Just behind where the air intake hose connects to the top of the motor is where the coil pack is on this vehicle.
What can be added to gain horsepower to the air intake of a 99 3.8L V6 Pontiac firebird?
what can be added to gain horsepower to the air intake of a 2.2L Pontiac sunfire?
Where is the coil pack on a 1999 Pontiac sunfire gt 2.4?
On a 1999 Pontiac Sunfire GT with a 2.4-liter engine, the coil pack is located on the engine's front, near the intake manifold. It is mounted on the engine block, just above the spark plugs. To access it, you may need to remove any engine covers or components obstructing your view. Be sure to disconnect the battery before working on the ignition system.
Where is the egr valve on a 2000 Pontiac sunfire 2.2L vin4?
The EGR (Exhaust Gas Recirculation) valve on a 2000 Pontiac Sunfire with a 2.2L engine (VIN 4) is located on the intake manifold, typically near the throttle body. It is a cylindrical component connected to the exhaust system and has a vacuum line and electrical connector attached. To access it easily, you may need to remove any obstacles such as the air intake duct or engine cover. Always ensure the engine is cool and disconnected from the battery before attempting any repairs.
With increasing temperature of intake air IC engine efficiency?
as intake air temperature increases it lead to decreas in i.c engine efficiency. as engine efficiency is ratio of difference in intake and outlet temperature to intake temperature.
Where is map sensor 2003 Pontiac sunfire?
The map sensor on a 2003 Pontiac Sunfire is located on the intake manifold, typically near the throttle body. It may be mounted directly on the manifold or attached to a nearby bracket. To access it, you may need to remove some engine covers or components for better visibility. Always ensure the engine is off and cool before attempting to locate or work on the sensor.
Where is the Egr valve on a 2002 Pontiac Sunfire?
The EGR (Exhaust Gas Recirculation) valve on a 2002 Pontiac Sunfire is typically located on the engine's intake manifold, near the throttle body. It can be found on the driver's side of the engine, mounted to the manifold itself. To access it, you may need to remove any covers or components obstructing the area. Always consult your vehicle’s service manual for precise location and removal instructions.
Where is map sensor on 96 Pontiac Sunfire?
On a 1996 Pontiac Sunfire, the manifold absolute pressure (MAP) sensor is typically located on the intake manifold. It is usually found near the throttle body or attached to the manifold itself. To access it, you may need to remove the engine cover or other components, depending on the specific engine configuration. Always refer to the vehicle's service manual for precise location and removal instructions.
What are torque specs for head gasket and intake manifold for 1999 Pontiac sunfire?
The 1999 Pontiac cylinder head gasket bolt torque specification is 160 pounds. The intake manifold bolt torque specification is 90 pounds.
Where is the IAT sensor located on a 2004 Pontiac GTO with 5.7?
The Intake Air Temperature (IAT) sensor on a 2004 Pontiac GTO with a 5.7L engine is typically located in the intake manifold or air intake duct. Specifically, it is often found near the throttle body or in the air intake tubing leading to the engine. For precise location, you may want to consult the vehicle’s service manual or a repair guide.
