The map sensor on a 2003 Pontiac Sunfire is located on the intake manifold, typically near the throttle body. It may be mounted directly on the manifold or attached to a nearby bracket. To access it, you may need to remove some engine covers or components for better visibility. Always ensure the engine is off and cool before attempting to locate or work on the sensor.
were is my 1999 pontiac grand am map sensor location
On a 1996 Pontiac Sunfire, the manifold absolute pressure (MAP) sensor is typically located on the intake manifold. It is usually found near the throttle body or attached to the manifold itself. To access it, you may need to remove the engine cover or other components, depending on the specific engine configuration. Always refer to the vehicle's service manual for precise location and removal instructions.
i need a diagram of wher the map sensor is.
The PCV valve is located under the MAP sensor on a 1990 Pontiac Grand Prix. The MAP sensor is in the upper plenum.
Where is the MAP sensor located on a 2003 Cadillac DevilleRead more: [[Q/Where is the MAP sensor located on a 2003 Cadillac Deville#ixzz2R1XaEPL2|http://wiki.answers.com/Q/Where_is_the_MAP_sensor_located_on_a_2003_Cadillac_Deville#ixzz2R1XaEPL2]]
Manifold Absolute Pressure sensor or MAP sensor is connected to the top of the throttle body assembly. It has 2 screws holding it in place and an electrical connection. Remove the 2 screws and disconnect the connection. Gently pry the sensor from the throttle body. Reassemble in reverse order.
There isn't one you take the 2 screws out to remove the map sensor in which plugs directly into a hole in the intake manifold that's where it gets its vacuum from.
where is a map sensor loction for 1994 ponatic bonneville?
MAP Sensor LocationOn a 1987 Pontiac Fiero GT 2.8L V6. It is bolted to the end of the intake plenum on the passenger side of the engine compartment.
about $50
www.motorcraft.com does not list a MAP sensor for the 4.2 L V6 , 4.6 L or 5.4 L V8 engines for a 2003 F150 , they list an air mass sensor which I assume is the MAF sensor
one of the map sensor or vacuum switch.