It is located on the left side between the left front wheel and front of the vehicle behind the plastic fender panel. To remove or access the battery, first, remove the negative batteriy cable under the hood located on the left wheel well, then block the rear wheels, raise the front left wheel, remove the left front wheel(you can access the battery without removing the wheel, but much easier by removing it), now there are two Phillips head screws on the fender well and three plastic push pins that need to be removed to remove the cover panel. Once the cover is removed, you can see the battery. It may or may not have a heat pad around it. Remove the top clamp on the battery by removing the front and and rear bolts, then remove the negative cable and then the positive cable and remove the battery.
Group size 86 is the specified size. for a Chrysler Sebring Coupe LXi.Group size 26 is an alternate, but make sure of the measurements BEFORE you buy.
what are the symptoms of a bad thermostat on a 1997 Chrysler Sebring Lxi what are the symptoms of a bad thermostat on a 1997 Chrysler Sebring Lxi
No. They will rub.
It is inside the fuel tank.
LXI stands for the Luxury design of the Chrysler Sebring. It has an improved trim and other features that the normal Sebring does not.
Change it every 100,000 miles.
where is the crank sensor located on my 1997 Chrysler sebring lxi
600-1000 depends on temperature and load.
Yes, but depending on the failure a replacement may be cheaper.
Very few if any will fit. They are different body styles with different engines.
No, different body shape.No, different body shape.
The 1998 Chrysler Sebring has a timing belt.
in the tank mostly
It has a 2.7L V-6 engine (so it has 6 cylinders).
Driver side front, under the hood.
On my 2001 LXi coupe, it is in the grill, at the top right.
CAPACITIESEngine, with Wix Filter 51085..........5.0 quarts
The three buttons on the sun visor of a 1999 Chrysler Sebring Lxi are for opening garage doors.
In the fuel tank