to get to the battery i had to remove the slanted black pole in the left side under the hood. its right under the fuse box.
The ECM on a 1998 Pontiac Transport with the 3.4 V6 engine is located on the passenger side. It is behind the glove box.
how do you change a brake booster valve to a 1998 Pontiac transport
It is located behind the crankshaft pulley and requires the pulley to be removed to change it out.
To access the heater resistor on a 1998 Pontiac Transport, first, disconnect the negative battery cable to ensure safety. Then, remove the lower dashboard panel beneath the glove compartment to gain access to the heater assembly. The heater resistor is typically located near the blower motor; unscrew it from its mounting and disconnect the electrical connector to replace it as needed. Reassemble the panels and reconnect the battery once the replacement is complete.
What causes a 1998 Pontiac transport to run hot and engine shuts off
outside of tank.located in front of tank
several relays in th fuse compartment sitting above the battery. They are the ones that you cannot see the element.
3400 v6
The proper tire size for a 1998 Pontiac Transport is P205/70R15. This info is on a sticker placed on the driver's door jam.
if your standing in front of the van they are located straight ahead right under the wiper arms
the cam sensor is under the power steering pump .So It is bolted directly to the crankcase.
Look under the vehicle along the frame rail follow the fuel line from the tank