the cam sensor is under the Power Steering pump .So It is bolted directly to the crankcase.
It is located behind the crankshaft pulley and requires the pulley to be removed to change it out.
The ECM on a 1998 Pontiac Transport with the 3.4 V6 engine is located on the passenger side. It is behind the glove box.
i need a diagram of wher the map sensor is.
In a 1998 Pontiac Transport, the oxygen sensor is typically located in the exhaust system. There are usually two sensors: one before the catalytic converter (upstream) and one after it (downstream). The upstream sensor is generally positioned on the exhaust manifold or near the engine block, while the downstream sensor is found further along the exhaust pipe, close to the catalytic converter. Accessing these sensors may require lifting the vehicle for better visibility and reach.
Its located under rear manifold remove coils and bracket reach just behind manifold 10mm socket needed
how do you change a brake booster valve to a 1998 Pontiac transport
The camshaft position sensor on a 1998 Pontiac Grand Prix is located behind the rear bearing of the camshaft. It constantly monitors the rotation of the camshaft and relays this information to the computer.
What causes a 1998 Pontiac transport to run hot and engine shuts off
The upstream O2 sensor is mounted in the ehxaust manifold The downstream O2 sensor is mounted in the exhaust pipe after the catalytic converter
outside of tank.located in front of tank
3400 v6
You can find the PCV valve beneath the MAP sensor located in the plenum at the right front of the engine.