If it's the brakes your talking about there is one bleeder valve at each wheel on the brake calipers in the front wheels and on the backside of the rear drums. It's a small screw that has an opening at the top. If your going to bleed them yourself you'll need an extra person. First make sure your Brake fluid reservoir is full. ( You'll need to keep it full during the procedure ) Then you bleed each wheel starting at the right rear, then left rear, right front then left front. To do so get your wrench ready to open the screw a 1/4 to 1/2 turn to the left. (it's an 8mm or 10mm) Then if you have a small piece of rubber hose to attach to the end of the screw and place in a clear bottle do so. This is to observe the fluid for air bubbles as it comes out. If not just repeat the bleeding about 4 to 5 times on each wheel. First have the other person pump the brake pedal 3 to 4 times and hold it down. Then you open the screw up for a second or to and shut it back. Then they can let off the pedal and pump it back up for the next time. After all four wheels are done the pedal should be noticeably firmer.
The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.
Were is the PVC valve located
The EGR valve is directly under the hood on the 89 Cavalier.
which one?
There is a bleeder valve. It is located on a metal coolant line. The screw for the bleeder is right next to the oil fill neck. It has a stick next to it that says do not vent when engine is running.
Not sure but, if it does have a bleeder it would be located at the highest point where the coolant flows in the engine.
where is the shift solenoid valve (2-3) located on 2000 chev cavalier
The knock sensor for the 1993 Chevy Cavalier is located in the back of the motor. It can also be located in the engine valve.
The pcv valve should be located on the top of the valve cover. It is located closer to the rear of the motor.
The PCV valve is located on the top of the valve cover. There will be a large vacuum line connected to it.
its on the right side of the valve cover, near the power steering pump.
Doesn't have a cooling system bleeder valve.