The 2005 Ford F1 50 pickup truck blower motor resistor pack can be found on the firewall in the engine compartment. The blower motor resistor pack is on the passenger side of the firewall.
The blower motor resister is located just to the left of the blower motor on the passengers side right below the blower motor return air tube.......
The blower resistor assembly is located on the heater case to the right of the blower motor. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups
It is behind the glove box door.
you need a new blower motor resistor with auto temp control
Behind the glovebox and it secured with only 2 screws.
The blower resistor assembly is located on the heater case to the right of the bloser motor. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups
Pull out the lock on the blower motor resistor wire harness connector to unlock the connector latch . Depress the latch on the blower motor resistor wire harness connector and disconnect the connector from the resistor. Remove the two screws that secure the blower motor resistor block to the HVAC housing. Remove the resistor block from the HVAC housing............
Blower resistor is behind the blower motor up against the firewall you can see wires hanging down from it. (Mite be called blower control module in 2005 models.)
Replace the blower motor resistor.
The 2005 Pontiac fan motor resistor is located on the back of the fan motor. The fan motor resistor is attached to the fan motor with two retaining screws.
Behind the glove box.
It is under the dash on the passenger side.