on side of master cylinder.
The brake switch is located on the brake master cylinder!
Master cylinder brake lines are the most common brake lines on a the Chevy Malibu.
The one on the master cylinder is the brake light switch. The one on the brake pedal is for the automatic transmission, assuming that the car is automatic.
It is threaded into the master cylinder. If you can't reach from under, remove the fuel tank to expose the master cylinder and brake light switch.
There is a brake fluid sensor located in the reservoir at the master cylinder. When the brake fluid is low it will turn the light on.
it is under hood on drivers side. just below the brake booster.
The brake light switch is threaded into the master cylinder. Open the hood, look at the brake master cylinder, notice the brake light switch with wires connected. Have new one ready to install when you remove the old one to keep loss of brake fluid to a minimum.
will be attached to the brake pedal where the master cylinder rod is
Above the brake pedal where the master cylinder is attached to the brake pedal assembly.
Mounted somewhere on the brake pedal lever, or possibly a pressure switch on the master cylinder, depending on the vehicle.
look on top of the brake pedal or on the master cylinder.
Above the brake pedal where the master cylinder actuator rod attaches.