Want this question answered?
Sensor is available, Chrysler calls it a pick up plate.
The cam sensor on a 99 Buick Regal is located behind the rear cam bearing cap. It monitors the rotation of the cam and relays information to the vehicle's computer.
It can, but not always.
It has both, The crank sensor is on the timing cover passenger side behind the balancer. The cam sensor is the distributor, Inside of it.
there is no such thing as an egr position sensor
located behind cyl. head ,attached to the drivers side cam
p0341 is camshaft sensor A-bank 1 ckt range/perf, the cam sensor is bad or the wiring to it.
Yes
I use 5/30 synthetic oil for my 99 C230 Kompressor, and 03 C240
With the key?
Crank sensor is on the driver side of the bell housing, Cam sensor is in the distributor. Computer is mounted to the inner fender.
Disconnect the battery. On the side of the throttle body, disconnect the wiring from the position sensor. Remove the bolts from the sensor, and lift the sensor off, reverse the procedure to install the new one.