back side by coil pack
The knock sensor for a 1996 200sx is located on the passenger side of the engine. It is located under the intake manifold.
Its in the distributer.
The ECT or the Engine Coolant Temperature Sensor is a switch. This switch is located on the bottom of the radiator in the 1996 Camry.
The oil pressure sensor is located on the back of the engine, next to the distributor.The oil pressure sensor is located on the back of the engine, next to the distributor.
The knock sensor is located on the side of the engine block near the bellhousing
where is the crank sensor located at on a 1996 cutlass ciera wit a 3.1 engine
were is the crankshaft sensor located on a 1987 Pontiac Grand AM with a 2.5L engine
It is located on the side of the engine block. If you have a code for a knock sensor and you have a noise in the engine, it will set the code. That does not mean that the sensor is bad. They very rarely give problems.
the back
It is in the distributor.
It is located in the water pump housing on the front of the engine
check/replace the engine coolant level sensor located in the engine coolant overflow reservior (located at the rear of the engine compartment pass. side)