It is mounted on the front of the engine slightly to the right as you look from the front. There is a clip attached to it. 1 Bolt holds it in.
Is it the same for a 3.2 motor
It is inside the distributor. You have to replace the distributor to service the cam sensor.
On the six cylinder, yes.
call around to auto part stores if you have a autozone near you they can check them for free
Depending on the specific submodel (LX with 2.7L V6 or LXi/Limited with 3.5L V6), the average price for a cam position sensor will be around $50-70 if you buy from an auto parts store.
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
The cam sensor is not adjustable.
The cam sensor is in the distributor.
There is a problem with the cam sensor or the wiring to it.
Cam sensor is on the driver side front of the engine, mounted into the cam housing.. you may have to take the intake off to access it...
No crank sensor, only a cam position sensor.
The cam sensor on a 2005 Chrysler Town and Country is on the passenger side top of the engine next to where the motor mount bracket attaches.