Camshaft position sensor is on the front of the engine behind the belt(s) and wheely things. You'll have to get to it from under the front of the truck - but it sits on the engine front side, maybe 8 inches towards the driver's side from the center of the engine and about 1/2 way up the engine. It's 1/2 white and 1/2 black, has a wiring harness run to it from the bottom. Takes a 10mm bolt; be careful not to strip it putting it back in; once you find it - takes about 5 minutes to swap out - easy job once it's found!
The camshaft position sensor is located on the end of the camshaft housing, on a 2002 Daewoo. The sensor should be labeled as such.
show location of camshaft position sensor for 2002 Oldsmobile bravada.
The camshaft position sensor is located in the engine compartment of the 2002 Daewoo Leganza. It is at the end of the camshaft housing.
The camshaft position sensor on your 2002 automobile is located on the front of the camshaft. You will need to remove the front engine cover to access the sensor.
The camshaft position sensor on a 2002 Mitsubishi Gallant is located behind the rear camshaft bearing. It constantly updates the vehicle' computer about the status of the camshaft.
The 2002 Ford Ranger camshaft position sensor is located on the back of the camshaft. The rear engine plate will need to be removed in order to view the sensor.
Inside the distributer cap on the back side of it.
take the belt off, remove the three bolts by turning the pulley (there are three holes in it to see the bolts), then you can get to the camshaft sensor.
The 2003 Saturn L200 does not have a camshaft position sensor.
Where can I find the camshaft sensor for my car 2002 mitubishi galant es 4 clyinder
it does not have one, after 2000 modes the camshaft position sensor is eliminated the these vehicles use the use the VRS system to determine where the No. 1 piston is. therefore they only required a Crankshaft sensor not a Camshaft sensor.
Above the timming cover