Want this question answered?
A Briggs and Stratton L head twin engine wills pit gas out of the carburetor and flood out when starting if the diaphragm has been damaged. This will cause excessive fuel to enter the carburetor.
It is a Briggs & Stratton Engine, so get the engine model and try jackssmallengines.com.
My engine is idling too high. How do I adjust the idle speed?
with a big freagin hammer
The fuel system on a Briggs and Stratton engine works by fuel being gravity feed from the fuel tank. Fuel goes to the carburetor where air and gas the mix, after the air and fuel mix it is feed into the engine where the engine goes through the four strokes.
The fuel filter for a Honda self propelled push mower with a Briggs and Stratton engine is located between the fuel tank and the carburetor. The fuel filter is only about one inch long.
Clean out the carburetor with gas, the reason it wont keep running is its not getting enough gas through the carburetor.
Go to your local autoparts store and by the rebuild kit according to your carburetor. Inside the box will be an exploded diagram of the carb which will make it relativly simple to rebuild First of all what kind of engine do you have. Briggs and Stratton or Tecumseh. If you have a Briggs & Stratton engine the factory setting on the little black screw is 1 turn out, Tecumseh engines 'usually' do not have adjustments. hope this helps
Because your carburetor is not getting fuel to the engine - could be a plug in the fuel line or it could be dirt in the screen in the pick up tube in the carburetor. I would suggest you clean the carbutator.
0.030 is the gap for briggs and stratton 4.5 hp mower
were can i find a wiring diagram for a 18 hp briggs and stratton engine
You can get that info on the Briggs and Stratton website. Just go to: http://www.ereplacementparts.com/briggs-and-stratton-parts-c-16758.html?gclid=CPCZj4vGr58CFZdM5Qodp3bDsA and enter your engine model number.