It's bolted to the bell housing on the upper passenger side near the firewall. It reads engine speed from the flywheel.
the crankshaft sensor is behind the cylinder head on the top of the bell-housing (where the motor and transmission bolt together)
The crankshaft position sensor is on the top of the transmission bell housing behind the passenger side cylinder head.
Usually a crankshaft sensor is located on the bellhousing of the transmission
It on the back of the coil packs going into the side of the block.
Top driver side of the bell housing.
It goes into the top of bell housing.
Crankshaft sensor is located on the right side of the cylinder block behind or under the starter. It is fitted into the rear crankshaft oil seal hausing.
Driver side of the bell housing.
its bolted to the cylinder block near the rear of the right cylinder head
The flex plate is the flywheel. It is between the crankshaft and torque converter. The crankshaft position sensor is located behind the passenger side cylinder head, through the top of the transmission case.
Under the timing belt cover!
The crankshaft position sensor on a Dodge 5.9L V8 is located behind the passenger side cylinder head, and it aims at the flywheel through a hole in the bell housing.