0
open hood or bonnet.
on 89-98 it is that funny black thing dead center top. with 4 high voltage wires
going to 4 spark plugs on top.
if after 98 or any DOCH, id dont have a DISTY.
so i cant answer , no year stated.
I have a 04 Tracker with a V6 and has no DISTY.
see my profile for a great link.
What else can I help you with?
Where is the crank angel scencer at in a 1991 Geo Tracker?
Inside the distributor
Where is the crank shaft position sensor on a 1995 Geo Tracker?
in the distributor
Where is the distributor cap on the 2000 Chevy Tracker?
The distributor is located on the rear of the engine next to the firewall on a 2.0 4 cylinder.
Trying to find a 1995 geo tracker distributor cover inside the distributor there was a cover over the bottom of the distributor what does it do without it it runs badly?
Pick up coil?
What is the firing order on the distributor on a 97 tracker 1.6L 16v dohc?
1-3-4-2 Distributor rotates counterclockwise.
What is the firing order on a 1995 Chevy Tracker?
It is a Geo Tracker not Chevy Tracker. Firing order is 1-3-4-2AnswerHI, The firing order is 1-3-4-2 and the distributor rotation is clockwise.. If you face the distributor cap as a clock, 1 is at seven o'clock, 3 is at 10 o'clock then 4 then 2. Steve H.
Where is the condenser on a 2000 Chevy tracker?
This motor has no distributor. It has a coil pack for each spark plug. There is no condenser.
Where distributor in 2000 Chevy Tracker?
I am assuming you have the 2.0L? If so this is a distributor-less engine with coil over plug ignition. The spark signal comes from the crankshaft position sensor.
Where is the distributor in the Geo Tracker?
top rear center , ive answered 2 times now. see my profile.
How do you change Geo Tracker distributor?
see my profile see link. click , maintenance then ignition timing. behold
How do you replace the o ring on the distributor of a 96 geo tracker?
Locate the distributor and mark where timing is set at. Loosen the 3 bolts holding the distributor in place. Disconnect any wiring. Pull off the o-ring and install the new one.
What is the distributor cap firing order for 95 Geo Tracker?
The firing order for a 1995 Geo Tracker, which has a 1.6L engine, is 1-3-4-2. The distributor cap terminals are arranged in this order, with cylinder 1 typically located at the front of the engine. Ensure that the ignition timing is set correctly for optimal engine performance.
