how do you change the engine oil and oil filter on a 96 ford aspire
I just got some autolites for my 96 aspire. gap is .044"
Just use the suggested R15
Rotate the distributor. (Don't try this unless you know what you are doing.)
I'm not for sure if it's the same as a 96 aspire, but in the 96 all you have to do unscrew the screws that are located on the outer edge of the panel. Then remove the cover on the mirrior inside the car.
I know that they have R15 in the size I don't know the rest original tires are 165/70 R13 for the 96 and 97 aspire
I have a 1995/96 ford aspire. During a emission testing the car failed due to a PO510 code - closed throttle position switch. What does that mean? And how do I fix it? Thanks
The 96 Ford Aspire probably has a loose or broken wire causing the problem. Start at the battery, check the terminals. Check the wires at the starter solenoid as well. One of these areas probably is causing the loss of power.
to reset the ecu on most 95-96 ford escorts dosconect the live terminal on the battery and leave for 2mins then reconect. the ecu is self learning and will re calibrate itsself.
There are three sensors related to coolant temperature on ford aspire - one for dash gauge, another one for the radiator fan and the third one for the ECU. The one which controls the fan is mounted on thermostat housing - so, it is the closes to where upper radiator hose meets the engine.
It is bolted to the underside of the throttle body. It has 1 harness connector and is attached with 2 bolts.
It's on the throttle body of the Ford Aspire.