under the termostat housing.
The 2003 Mazda engine coolant temperature sensor is located on the front of the engine, above the thermostat housing. The sensor will have to wires leading to it.
The coolant temperature sensor should be located near the upper coolant hose where it enters the engine block, just a few inches nearer to the windshield. It is usually a gold color.
The bank 2 is located on the driver side of the engine on the Mazda Tribute. The Sensor 2 is located after the catalytic converter.
The cam sensor is located on the left side of the engine (as your looking at it) on the valve cover. It is the only sensor that is located on that side on the upper part of the engine.
The 2000 Mazda Miata O2 sensor bank 1 is located on the firewall in the engine compartment. The sensor can be found on the passenger side of the firewall.
The intake air temperature sensor is located on the mass air flow sensor on the intake. There are five wires attached to the sensor.
you can't fix a sensor, you can replace one by removing it and installing the new one...:)
The crank position sensor is located on the front of the engine, behind the lower crank pulleys.
Where would the knock sensor be located on a 2004 mazda 6?
99 mazda b3000 where is the speed sensor located
There is a coolant temperature sensor and a temperature gauge sensor. the coolant sensor is located on driver side of the cylinder head. screws right into it, and the temperature gauge sensor is on the front side of the cylinder head right under the distributor. hope this helps
At the back of the engine on the coolant outlet that goes to the heater hoses on the firewall.