Want this question answered?
what does a flasher relay in 2000 dodge durango look like.
how to replace the flasher on a 2000 chrysler concorde LXI
how do you remove the flasher relay in a 2000 dodge intrepid. I got it unplugged but don't know how to remove it
The 2000 Chevy Cavalier turn signal flasher relay switch is located beneath the drivers side dashboard. The turn signal flasher relay switch will be above the accelerator pedal.
The 2000 Ford E1 50 turn signal flasher relay switch can be found beneath the drivers side dashboard. The turn signal flasher relay switch will be about the brake pedal.
right next to the fuse box
Behind the fuse box
where is air flow relay on 2000 ford windstar
Are you asking where the Flasher Relay is? If so, you will need to provide the model Dodge if you expect and answer.
it is under the drivers side by the pedals, lie on your back under the steering column and it is the larger black relay on the right. You have to pull it hard to get it out and it should say Flasher and the part number good luck 2000 Toyota Sienna Blinker/Hazard flasher relay. Flasher relay part number toyota-81980-AA1, Flasher relay part number generic-Tridon EP35. Flasher relay location- Looking at the fuse panel from the feet up view, the flasher relay is on the back, left wall of the fuse panel. The relay prongs, quantity three, are enveloped by the flasher relay casing which makes it difficult to extract the flasher relay from its location. The flasher relay will need to be pulled up and away from the person removing it. After replacing the flasher relay; the flasher can be tested by actuating the hazard/emergency flashers button without the ignition key engaged, the left blinker or right blinker will not work without the ignition key engaged.
under dash
Follow the wiring harness from your blinker. Disconnect the factory harness from the relay. Replace with the new relay.