Want this question answered?
You'll need to install a tee into the line by the fuel filter to check it, there is no shrader valve.
The filter is located behind the RH side of the carbon canister under the hood.
A Villager, like most cars, has only one fuel filter.
low fuel pressure most likely fuel filter
The Villager does not have a test port. You need to tee into the line at the fuel filter.
The fuel filter is located under the hood on the drivers side beneath the master cylinder
tank has to be removed fuel pump is inside the tank
Under the vehicle, approximately in the middle, driver's side.
Really? Unclip the cover and remove the old filter. It's easy.
The Villager does not have a test port, you need to tee into the line near the fuel filter to test pressure.
According to fordparts.com : For a 1995 Mercury Villager : Engine oil filter ( Motorcraft FL - 839 ) Engine air filter ( Motorcraft FA - 1121 ) Engine fuel filter ( Motorcraft FG - 978 )
The fuel pump is located in the tank, and the tank must be removed to access it.