Want this question answered?
It is behind the engine mount on the front of the block.
Four cylinder, rear and transmission side of engine block. Six cylinder, front rear and transmission side of the engine block.
V6, it is behind the motor mount on the front of the block. Four cylinder, below the exhaust manifold on the rear of the engine.
If the engine is fuel injected, it is an electric pump and is located in the fuel tank. If not, it is located on the engine block and is a mechanical pump.
If you had water in the cooling system and it froze, every component is a possible leak. Hoses, radiator, engine block itself.
If all do not work - check fuse in power distribution block under hood
Fill the cooling system and pressure test. Find where the fluid is coming out and you will know the source.
Hi, assuming your Lebaron has the 3.0 engine, the pcv valve is located right behind the valve cover that faces you looking at the engine. It's toward the right side. It's threaded into the block and there will be a black tube coming out of it. Very easy to remove and replace. rtalk7
Not unless it's insulated properly.
A block heater was not standard equipment on a 2001 Chrysler 300m.
Since a ground block is not well insulated, there's always the danger of a short.
no, I placed a 100w lightbulb underneath the oil pan