FUEL PUMP SHUT-OFF SWITCH After a collision, if the engine cranks but does not start, the fuel pump shut-off switch may have been activated. The "Fuel Reset" indicator light will illuminate in the instrument cluster. The shut-off switch is a device intended to stop the electric fuel pump when your vehicle has been involved in a substantial jolt. 1. Turn the ignition to the OFF position. 2. Check the fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pump shut-off switch by pushing in the reset button. 4. Turn the ignition to the ON position. Pause for a few seconds and return the key to the OFF position. 5. Make a further check for leaks in the fuel system. Roadside emergencies The fuel pump shut-off switch is located in the passenger's foot well, behind the kick panel.
their is not one
It is located on the passenger floor/firewall, left of center. It is a squarish black box with a white turkey thermometer type button on top. Jefpcon
If you are looking for an inertia switch on a Chevrolet C30 truck, there isn't one. Chevrolet does not use reset switches.
The 1988 Mitsubishi pickup truck data link connector is located on the bottom of the drivers side dashboard. The gauge link connector will be to the left of the steering column.
were is the power steering pressure switch on a 1988 oldsmobile cutlass 2.8 engine
On the firewall, passenger side.
There is none.
= Fuel Injector, 1988-95 GMC TRUCK C SERIES [INCLUDES TRUCK & SUBURBAN] 5.7L = Where is the module for the fuel injectors located?
No
it does not have a high pressure switch all it has is a evaporator temp sensor/switch.
There are several relays on that vehicle, need to know which one you are looking for.
99 acura Ti