Rarely do you find a bleeder valve on the heater. If there is one, it will be located on the highest point of the heater core connections from the engine. You can bleed the heater by turning it to hot and starting the engine. Use the bleeder valves on the engine or remove the radiator cap and run the engine until no more air bubbles are escaping. This should bleed all air from the heater core.
The Haynes Jeep Cherokee 1984 - 1996 book has 7 different diagrams which show how to do that repair.
low coolant level, malfunctioning thermostat, clogged heater core, malfunctioning heater control valve, malfunctioning climate control programmer,
Jeep Cherokee - XJ - was created in 1984.
intake .004" exhaust .005" is the correct valve clearence for a 1984 xr500r.
The heater bypass valve is not fully closing, or leaking hot coolant into the heat exchanger.
how do u re-place a heater core for a 1984 Lincoln town car
the valve clearances is 3000 of a ince
best to replace it then bleed the brakes
Jeep Cherokee XJ 1984-1996 should interchange Jeep Cherokee XJ 1997-2001 should interchange
the valve clearance is 0.002" on both intake and exhaust.
beside the engine
Sport, Country Classic, Limited, (and others) are the names of available option packages. You basic 1984-2001 Cherokee is pretty much the same as any other Cherokee.