Want this question answered?
Where is the heater control valve on a 1994 Buick Regal
where is the heater control valve on a 1994 2500 suburban
The heater valve is located behind the dash above and to the right of the accelerator pedal. The heater core is right beside it. It is operated by a linkage to the slider on the heater control panel.
The Chrysler Concorde does not have a heater control valve. The temp is regulated with a blend air door inside the dash.
Ok, I got the answer to this question. It seems that there is not a heater control valve in the heater hose line.
it is in the heater hose close to the firewall near the master cylinder its a black plastic valve with a vacum hose connected to it
The heater control valve on a 1994 Ford Explorer is located near the firewall on the passenger side of the engine compartment. My 1994 Ford Explorer has a four port valve. This means that there are four hoses connected to the valve. It is very easy to view, as it sits directly on top of the engine compartment, near the a/c drier. It is easy to access. Should take less than ten minutes to remove and replace it with an OEM part. A very fast and easy fix!
it is located under the dash board first squeeze the glove box and pull it off by taking off the 3 bolts on the bottom then take off the 2 bolts on the heater core cover once that is off just look to your right there it is
the module is located on the passenger side inner fender well in the same area as the air cleaner and heater control valve
Either the linkage from the temp control unit to the valve on the heater core (which is behind the radio and temp controls) or it is the heater core itself.
yes they are in a 1994 chevy silverado and is located on the left side of the throttle body.
I have a 2004 Ford Explorer and the heat does not work, but when i try to turn the control valve to heat it makes a clicking noise. How do i fix it?