The 99-2002 camaro 3.8 V6 doesn't have Idle air control valve. It is drive by wire control. Many of the parts dealers have the wrong data that 95-02 3.8 camaro have the same Idle air control valve location, and sell the wrong part.
Where is the evap purge control valve located on a 96 camaro
On a 1996 Chevy Camaro, the PCV valve is located on the right side of the valve cover. There is a hose that runs from the PCV valve and connects to the back of the intake manifold.
its located on the drivers side back side of head pan
Ft
in the valve cover
It is on the throttle body housing.
on the passenger side of the throttle body
Disconnect the battery cables prior to working on the car. Disconnect the power leads attached to the sensor Remove the 2 screws located on the sides of the valve. Gently remove the valve assembly from the car
The PCV on a 2001 Chevy Camaro SS is located on the left valve cover. Pulls gas buildup from inside the engine and sends it back into the intake manifold.
The idle air control valve is located on the throttle body, and the EGR valve is located on the intake manifold.
The EGR is located on the back of the intake manifold, check out www.shbox.com they'll have most of your answers.
The heater control valve (temp blend door) is located behind the dash assembly. The dash assembly has to come out to gain access to it.