0
What else can I help you with?
What is a pool impeller?
An impeller is a rotating device that is used to force a fluid in a desired direction under pressure. A pool impeller is one of these devices, but in use in a pool.
What could be the cause for your pool whips to stop moving after two hours of filtration when the pressure reads normal on the sand filter?
Clean and empty in ground pool filter, clean and empty filter near pool pump. Be sure all whips are clear of dibris. also do a flush of the system. If this does not help, you will need to have a C02 charge done between the pool line and the pool pump. OR you may need to have your impeller replaced in the pool motor.
Where is the impellar on a pool pump?
I had a look to se if I could find a craster pool pump and had no luck however the impeller on every pool pump I have ever seen is in the impeller housing which is bolted straight against the motor.
Pool filter making a high pitch sound?
There could be a few reasons for a pool filter making a high-pitched sound. It could indicate a problem with the motor bearings, a clogged impeller, or air trapped in the system. Check these components and ensure they are clean and functioning properly to resolve the issue.
How do you stop aquarium filter from making noise?
An aqaurium filter is a very basic machine. Electricity causes a magnetic impeller to spin. Take the aquarium out/off of the tank and take it apart. Plug it in. It should be absolutely silent. If it makes noise with all the parts removed, throw it away. Clean the impeller hole and be sure to seat the impeller properly when you reassemble the filter (this fixes 99% of most noisy filter problems). Noise from a filter is generally a piece of gravel/dirt caught near the impeller, but it can also be a loose impeller fitting or even fluctuating electrical current.
What is the rotation of a swimming pool motor?
Looking at the impeller, counter clock wise
Vinyl pool when the pump comes on the flow that goes into the pool is not strong like it used to be It's very weak We keep the filter clean all the time Please help Pool is 3 years old.?
Its possible your pump impeller may be clogged. i advise to call a service professional to check this out.
How can I increase pool pump pressure effectively?
To increase pool pump pressure effectively, you can try cleaning or replacing the pool filter, checking for any clogs in the pump or pipes, adjusting the pump speed or impeller size, and ensuring proper water level in the pool. Regular maintenance and proper adjustments can help improve pump pressure.
Put a 1 hp impeller on a 2 hp pool motor?
well the motor will like it, it will run cool but the power bill will be high. it will not have the flow of a 2hp impeller
How can one assess if his pool has a clog in the filter line and how does he fix it?
Check the psi on the filter tank? If its lower than usual there is something stuck in the lines or jammed in the pump impeller. If its higher than normal, it just needs to be cleaned. Also, if you put the multiport handle into the recirculate position, this will bypass the filter. If everything works better in recirculate then you have a filter problem
How do you take an impeller off a hayward power flo lx pool pump?
To remove the impeller from a Hayward Power-Flo LX pool pump, first turn off the power and disconnect the pump from the electrical supply. Next, remove the pump's front cover by unscrewing the screws, then take out the diffuser to access the impeller. Use a socket wrench to unscrew the impeller by turning it counterclockwise, and be cautious of any debris that may have accumulated. Once removed, inspect the impeller for damage or wear before replacing or cleaning it.
How often should I clean my pool?
The cleaning schedules varies from filter to filter, but a general guideline on any swimming pool filter is to take a reading when the filter is clean, then clean the pool filter when the pressure rises about 10 psi.
