It is about 8 inches right of the steeringcolumn just behind the dash. You'll first need to remove the lower dash panel below the steering wheel. Then, you will also want to remove the mounting screws that hold the OBD connection and hood release. You may need to remove a piece of carpet that is held underneath the dash with plastic push pegs. You'll find a large black metal panel that runs from the left kick panel to the center console, attached by screws and bolts. The black panel will need to be removed. The bolts are attached at both sides of the steering column. You'll need a 6' extension to your socket to reach some of the bolts. Once the metal panel is removed, the actuator will be bare visible on the side of the heat/ac trunk. It is attached by 2 screws. Once the screws are removed, it is comes right off. It's a bit of a bear to work with because of the lack of space and can be intimidating, but it is doable. As with most projects, it will be much easier if I ever have to do another one.
Oldsmobile Intrigue 1999 is negative ground.
As long as the 1999 has the 3.5L engine, yes.
where is the camshaft position sensor located on a 1999 Oldsmobile intrigue
no
yes They are all the same on the body parts
How can i take off the alarm on my 1999 oldsmobile intrigue?
The 1999 Oldsmobile Intrigue coil pack is located on the firewall, in the engine compartment. The coil pack will be on the passenger side of the firewall.
No such thing.
The 1999 Olds Intrigue does have a dipstick. Use a funnel to add fluid as needed into the dipstick tube.
Very carefully.
18 Gallons.
Dex-cool prestone