Directly above the brake pedal.
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
That's what I am asking you. How do you replace a parking brake handle on an S-10 1996 Chevy Blazer?
you can find the switch on the back of the brake pedal.
you most likely need to change them
you say alot of prayers!
size of bolt on break calliber on Chevy trailblazer
It could be low on brake fluid, a sign of trouble. Have the brakes checked SOON!
it is a 1995 Chevy blazer and it will not go into park. have to use the emergency brake when stopped, and neutral to start it
Replace and bleed line
If nothing is holding the pedal down then the brake light switch is at fault.
Dot 3 will be just fine.
either your fuse is blown or the wiring is bad
The fuse or relay for power windows on a 2002 Chevy Blazer is located under the dash near the emergency brake. It can be readily replaced by pulling it out.
When replacing brake pads a diagram may be needed. Diagrams to remove brake pads can be found in Chevy forums and in the specified auto books found in auto stores.
The 1997 Chevrolet Blazer OBD 2 port is on lower edge of dash; right of parking brake