0
Where is the low pressure connection for the air conditioning system of a 1997 Buick Skylark?
Wiki User
∙ 16y ago
Most reliable means of location on any vehicle is to familiarize yourself with the layout of all components. Specifically, the low pressure (suction) service port on any a/c system is typically located between the evaporator (inside your dash) and the compressor itself. It normally runs through the receiver/drier en route and the connection is most often a part of the drier. From the actual belt-driven compressor there are two hoses, 1 runs to the condensor in front of the radiator, the other runs toward the aforementioned devices. ______________________________________________________________________
=== === == Under the car. Get a flashlight and look for the blue valve cover. No need to jack the car up.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where is the low pressure connection for the air conditioning system of a 1993 Jeep Cherokee?
The low pressure connection for your 1993 Jeep Cherokee air conditioning system is located on the top of the air conditioning compressor. There is a low pressure connection and a high pressure connection, both should be labeled.
Where is the location of the low pressure side on the air conditioning system on a 97 Buick Skylark?
low pressure side on a buick skylark with a 2.4 engine is by the compresor. you get to it from under the car. left side, front side of engine.
Where is the low pressure connection for the air conditioning system of a 1998 Mercury Mystique V6?
Hey Jeremy==It is close to or on the accumulator. GoodluckJoe
Why you prefer to connect tubes to low pressure connection at car air conditioning system compare to high pressure connection in air cond?
It is called high pressure for a good reason. The high pressure side can and will pump the refrigerant back into the can of refrigerant and explode in your hands. One more reason to let the professionals work on the air conditioning in your vehicle.
Where is the low pressure connection for the air conditioning system of a 1997 Jeep Cherokee?
AS YOU LOOK AT THE ENGINE COMPARTMENT FROM THE FRONT, LOOK TO THE UPPER LEFT AND YOU WILL SEE CHROME COLORED TUBING WITH LOW PRESSURE VALVE ON TOP.
Where is the pressure switch on a 1996 ford windstar air conditioning system?
The pressure switch for the air conditioning system on a 1996 Ford Windstar is located in the accumulator. It triggers when the compressor will turn on and off.
What determines the pressure on the low pressure side of a refrigeration system?
the boiling point of refrigerant in a refrigeration or air conditioning system determines the pressure of the low side of the system
How do you charge the air conditioner in a 1997 Mercedes E-Class?
You can charge your 1999 Mercury air conditioning system from the low pressure port on the air conditioning compressor. Connect your Freon bottle to the low pressure port and release the Freon into the system.
Where do you add the freon for the air conditioning system?
Through the schrader valve on the low pressure side of the system.
Where do you put in freon in a 2003 mountaineer?
You can recharge your air conditioning system by putting Freon into the low pressure port. The low pressure port can be found on top of the air conditioning compressor.
Where is tha low pressure valve on a 1995 mercury tracers air conditioning system?
The low pressure valve, on your 1995, Mercury, is located on the top of the air conditioning compressor. The low pressure valve should be labeled.
What causes the pressure sound you hear when you turn off the car air conditioning?
That is the normal sound of the pressure equalizing in the system.
