Want this question answered?
This motor has no distributor. It has a coil pack for each spark plug. There is no condenser.
Could be spark in the motor, or the distributor and rotor need to be replaced.
4.3? Follow the spark plug wires from the spark plugs, they will lead you right to the distributor.
Did you put power to the right terminals on the distributor? (one from battery,one from ignition) Did you run a ground strap to the engine? Good luck.
The number 1 cylinder is located at the front left of the engine block while FACING the engine. Follow the spark plug wire to the distributor a POW there it is.
If you look at the distributor of the car, sometimes they are marked with the cylinder number on the cap. Find number 1 and follow the spark plug cable to the spark plug. That will be No. 1 cylinder.
What is spark plug's position? tell me.
Is it a brand new distributor ? If not then replace the module and pick-up coil in the distributor that you have.
get the compression stroke up on the number 1 spark plug and look at the rotor inside the distributor cap to see if it points to the number 1 wire on the cap
If it has points in the distributor then it is 0.035 If it has an HEI distributor then it is 0.045
The distributor cap is located where the spark plugs cables are connected .They go from the motor to the distributor cap.
see if the coil is sparking to the distributor cap