Want this question answered?
The O2 heated sensor on a 2005 Chevrolet Aveo is located in the exhaust manifold. It measures the amount of oxygen left in the exhaust gases as they leave the vehicle.
Bank 1 is the bank of cylinders that contain cylinder 1. The O2 Sensor 1 is the O2 sensor located in the exhaust system between the cylinder head and the catalytic converter, also known as the "upstream" O2 sensor.
the o2 sensor is located in the exhaust manifold. As you pop the hood and look at the engine, you should see a silver colored heat shield. Unplug the old O2 sensor. Then remove the heat shield. Its easier this way (10 MM bolts). Get a O2 sensor socket and remove the sensor and replace. The rear sensor is located in 1 0f 3 places. Either before in or after the catalytic converter. For this one you just get the O2 sensor socket and remove. (When the engine is cold) Madd Dogg 40/40
the exhaust, where every o2 sensor is
The O2 sensor is in the front of the engine. If you look at the exhaust manifold by the heat shield you will see it. It screws into the exhaust and has a single wire coming out of it running back toward the drivers side of the engine. Easy to change
o2 sensor
The O2 sensor can be found on the outside of the air cleaner housing. The O2 sensor will be attached to the back of the air cleaner housing.
where is the 02 censor located
Where's it located? O2 sensor is in your exhaust so if uts not in the exhaust thrn no
The O2 sensor is located in the exhaust manifold on the front of the engine. To change it you'll need a 7/8 box-end wrench. Just unplug the wire from the harness, unscrew the sensor and replace it. It's pretty easy.
2004 vw beetle up stream o2 sensor location
There is an upstream and downstream O2 sensor (bank1 and bank2). Upstream is located close to the engine bay in FRONT of the cat converter, and 2 is located behind the converter.