I'm not sure about the 2008, but the 2007 with a 3.8 engine has a heavy plastic plate under the engine that has to be removed to get at the drain plug. The plate has 5 bolts that take a 12mm wrench or socket to remove and the plug is in a strange looking pan just above the front 2 bolts on the plate. The filter is a canister type filter located on the back side of the engine under another plastic plate on top of the engine. It has 1 bolt 10mm toward the front passenger side. Remove this bolt and pop the plate loose from 3 mounting pegs. The filter top screws off and the filter is removed from the top. Make sure to replace the O-Rings that come with the filter. I usually use a filter wrench to loosen the filter cap.
-Allan
It is a washable wire mesh oil filter located behind the drain plug ...when the drain plug is removed it will voluntarily come out via a spring.
It is a washable wire mesh oil filter located behind the drain plug ...when the drain plug is removed it will voluntarily come out via a spring ...
The fuel filter, in a 2008 Ford fusion, is located inside of the fuel tank. Drain the fuel from the fuel tank. Remove the fuel filter plate. The fuel filter will slide out. Reverse the process to install the new fuel filter.
On that Model year their is a small drain on bottom of the fuel filter. Its located back left of engine and is the only filter for the fuel system. It doubles as main filter and water seperator all in one housing. Good luck
The 2008 Kia Sorento has 24 valves.
The 2008 Kia Sorento has a V6 engine.
The 2008 Kia Sorento is a gas-powered vehicle.
The 2008 Kia Sorento has a 28.4 degrees angle of approach.
The curb weight of the 2008 Kia Sorento is 4068 lbs..
The maximum payload of the 2008 Kia Sorento is 1277 lbs..
The 2008 Kia Sorento's turning circle is 35.4 ft..
The 2008 Kia Sorento has a 25.8 degrees angle of departure.