0
next to where you pour the oil in about 2"to the right remove 2 screws and a plate and there it is
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Spark plug gap for 2005 kawasaki bayou 250 ATV?
spark gap is 0.28mm.
What year model is a kawasaki bayou 250 with the serial number jkblfba17yb776050?
What year model is a kawasaki bayou 250 with the serial number number JKALFMA133B516107
How many quarts of oil are used in a 2007 kawasaki bayou 250?
2.1 quarts when filter is not removed 2.2 when it is 2.1 quarts when filter is not removed 2.2 when it is
How fast does a kawasaki bayou 250 go?
The kawasaki bayou 250 goes exactly 39MPH. I know from experience as I had a person with a speedometer ride next to me
Type of oil for motor 2006 kawasaki 250 bayou?
10w40
How fast does a kawasaki 250 go?
The kawasaki bayou 250 goes exactly 39MPH. I know from experience as I had a person with a speedometer ride next to me
What is the top speed of a Kawasaki Bayou 250?
I own a 2006 Kawasaki Bayou 250 that was purchased new, I have raced my friend and he owns a 2001 Honda Sportrax 300ex, the Bayou does up to 4th gear on the Honda, so around 50-55 mph is max mph. - Quadrider7
How do you change the starter on a 2001 250 kawasaki bayou?
take it to the shop if u dont know
What is the valve lash adjustment on 2004 kawasaki 250 bayou?
.21-.25 Intake. .25 Out
What are Valve specs for 2006 kawasaki bayou 250 what is the degree for the timing?
10.5 degrees before TDC at 1350 rpms !
How do you start kawasaki 250 bayou in cold weather?
i have a older 220 bayou and it's a pain to start in cold weather and to make it worse it's a pull start what you do is take the seat off and you'll see the air filter soak it in starting fluid and remove air filter off carb and spray in there a few hard pulls should fire it right up
Removal of starter 2005 kawasaki 250 bayou?
Starter located under seat. Remove Filter Box then unhook cable from battery and hot terminal from starter. Remove two screws from end of starter and pull out, a screwdriver may be needed. You may have to loosen oil steel lines to allow room for starter to come out.
