The oil drain plug is the 17mm nut at the bottom of the engine oil pan, underneath the bike. Approach it from the left side of the bike, so you don't have to maneuver around the exhaust pipe. Pay attention to the screw direction (it's upside down). Be careful not to strip the threads by over-tightening when you replace it.
The spark plug gap for a 1998 Suzuki GS500 is .035"
Under the bike on the left side is a 17mm nut.
0.7 to 0.8
o.39 in
Bandit 1200Cold: NGK JR10BStock: NGK JR9BHot: NGK JR8B Autolite Stock # 4143 New Autolite Plug # 4162 Champion Stock # 905 RA4HC New Champion - RA6HC # 809Bosch - XR4CSBandit 600 (dual electrode)Stock: NGK CR9EKDenso U27ETR The spark plug gap should be 0.6-0.7mm (0.024-0.028in) for both models. Dual electrode plugs do not really enhance performance but offer longer life than single electrode plugs. The JR9C plugs can be used on the Bandit 1200 without problem and give faster starts and better idle and a slight bit more compression.Another option is Autolite #4162 spark plugs which fit exactly the same and areusually cheaper than NGK's. FOR MORE INFO ON BANDITS SEARCH "FAST LARRY'S BANDITS"
usually at the bottom or rear of the radiator - or remove the lower radiator hose
spark plug gap for 140hp suzuki 4 stroke
What is the spark plug gap for a 1996 suzuki gsxr 750?
Remove the plug on the bottom of the oil pan. Allow the motor oil to drain out. Replace the plug to its original position. Fill the motor with oil.
Gap the plugs .038" to .043" and torque the plugs to 22 ft/lbs.
follow the plug wires
If you take the fill plug out of the side of the trans you just fill it up till it comes out of that hole.