Want this question answered?
How do you replace the orifice tube on a 2000 Mercury Marquis
Orifice tube on f150 with 4.2
If it has a rear orifice it's in the rear unit under the roof panel.
If you mean the orifice tube, it is in the low pressure line. If there is a hex nut in the line, you can separate the two parts and remove the orifice tube. If there is no nut, just a crimp, the line must be cut and a repair kit installed to contain the new orifice tube.
It is located in the line between the High side service port and the evaporator in front of the alternator. It's hidden under the foam pipe insulation. Taurus/Sable Liquid Line and Orifice Tube The orifice tubes on 2000 to 2007 Ford Taurus and 2000 to 2005 Mercury Sable can be changed. At first glance, the liquid line looks like one long hose. But unlike the liquid lines of the '80s and '90s, this hose has a fitting in the middle. The orifice tube is located at this fitting. To replace the orifice tube, remove the washer and overflow bottle. The high side service port is on a pipe about eight inches long to make it easier for service. The fitting and orifice tube are near this pipe. The fitting is covered with a protective rubber cover. The cover makes it hard to see the fitting and that the orifice tube is replaceable. Push the cover back. Disconnect the fitting. Replace the orifice tube. Lubricate the new o-ring (# 24608), and torque the fitting to 18 lb-ft.
It slides into the end of the tube on the condenser.
Down the tube that holds the trans dipstick.
orfice is located under brake booster
It does not have an orifice tube.
behind passenger side fender close to door
It uses an expansion valve, not an orifice tube.
The orifice tube is located between the engine and the fire wall. The windshield wiper cowling has to be removed to gain access to the orifice tube.