Drivers side kick panel behind the parking brake assembly. The connector will need to be disconnected at the fire wall in the engine compartment using a 10mm socket and wrench. The park brake assembly needs to be removed to gain access. Good luck hope this helps!!
The PCM, or EEC, would likely be under the dash on the left of the ashtray. At least that's how it is on my '90 F250.
Where is the starter and what does it look like on 2002 f250 ford diesel?
Some mechanics will tell you it is built into the PCM, however, some parts houses show a MAP/Baro Sensor separate from the PCM. On a 2001 the MAP sensor is located on the passenger side on the firewall about 12 inches to the left of the back of the valve cover.
PCM ( Powertrain Control Module )
170mm
PCM is located in bottom of air box
yes they are the same 8 lug pattern
The PCM has detected a fault and set a trouble code.
yes
The PCM is bolted through the fire wall. Behind the parking brake. You will need to remove the driver side inner fender liner to get at it.
The PCM is very tricky I have gone thru 3 and am now on my 4th There is a company Auto Computer Exchange who sells them for around 150.00 already flashed. You must have the PCM flashed by your Vin# every Cars brain is different. So my answer is no a 2002 PCM will not work.
Powertrain Control Module