Want this question answered?
The power steering pressure sensor is located on the front of the power steering pump. It is circular and has one wire going to it.
On the back side of the power steering pump
the power steering reservoir is located next to coolant expansion tank in the engine compartment.
The Camshaft Position Sensor is located behind the Power Steering Pump.
Located in the power steering gear box on the under side of the front cross member.
Located on the power steering gear box by the front cross member.
The power steering reservoir can be located on the right-hand side of the engine, near the back. The cap will be labeled as power steering fluid only.
Do you have the 3.4l or 2.4l engine, the camshaft position sensor for the v6(3.4l) is located under the power steering pump
Cam shaft sensor is located under the power steering pump on the block
behind the power steering reservoir
It screws into the pressure line at the rear of the engine.
the thermostat this locator on the passenger side.under the exhaust manifold and the power steering pump. you have to remove the power steering pump to take it off. the power steering pump has a trick. the bottom bolts can be removed without removing the sensor. you use a 10 millimeter wrench to break the bolt. and then you start twisting out and pulling the power steering pump out at the same time