answersLogoWhite

0


Best Answer

There is a plug on the engine right beside the oil filter. This will drain the engine and rad. Or, just remove the lower rad. hose at the thermostat.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where is the radiator drain plug on a 1987 Honda goldwing?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change the headlight in a 1985 Honda Goldwing GL1200 Aspencade?

How would you change the headlight bulb in a 1987 Honda goldwing? GL1200


What is the oil capacity of a 1987 Honda goldwing 1200I?

With the filter changed 3.5 liters will do.


Where is the radiator drain plug on a 1987 Pontiac Grand Am?

there may not be one if there is it is on the bottom if not you just remove the bottom radiator hose to drain


1987 Honda goldwing will not start?

You will have to start with the basic things. Do you have fuel ? and do you have spark ? check these 2 things first.


Where is the Radiator drain plug on a 1987 f -150?

look on the lower inside corner of the radiator


Where is radiator drain on Toyota 1987 Camry?

It must be at bottom of the radiator, you should a valve responsible for drainage.


Where can you find a OEM replacement passenger backrest for 1987 Wineberry Red Honda Goldwing?

Long shot, but try mototourinc.com


Will a 1984 1200cc Honda goldwing engine and transmission match a 1985 aspencade?

1984 to 1987 same engine same bike.


What year did fuel injector became standard in Honda gold wing?

The first Honda Goldwing with fuel injection was the 1985 LTD model produced until 1987. When the Goldwing engine was enlarged to 1800cc in 2001 then that model and all susequent models had fuel injection.


How do you change the transmission fluid in a 1987 Honda Accord LX?

you pull the drain plug on the side of the transmission


Where is the cooling system drain plug located on a 1987 Nissan Stanza?

Bottom of radiator on driver side. open radiator cap, and turn drain plug at bottom counter clockwise, you should see the water/coolant drain out. Once empty, place water hose on radiator and let it flush for a few minutes or till you see the water come out clear, shut off the water, let radiator drain, screw drain plug back in place and fill radiator with a mixture or 50/50 water/coolant.


Where is the oil drain plug for a 1987 Honda GL1200i?

Right side ( foot brake ) under and at the rear of the engine.