There isn't a reset switch. The light is reset with a scan tool after the cause of the trouble code has been repaired.
on the driver side by the front speaker up underneath is a switch that turns off the check engine light.
An auto parts store can reset it for you.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
"Check Engine" light comes on when you turn ignition switch on and should go off when engine cranks.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
there is no service engine soon reset switch. The vehicle is telling you is has a serious problem. the only way to check it out is to take it to a shop or get an OBDII scaner there is a reason for the light coming on. There is a failure within the controls of your motor. But to clear it you can disconnect the battery for five minutes.
AnswerHi, If your vehicle has a switch, it should be under the dash, on ther left side on the steering column support or to the left of the speaker. The lamp can be reset by moving the switch up then down. If the light remains on then check the system. Steve H. or DISCONECT the battery for 30 sec then reconect
www.troublecodes.net Good luck I have a 1995 jdauksz1@charter.net
It may be the emission system maintenance reminder. there is a switch on the back side of the dash next to the left dash speaker, try changing the position of this switch.
No it will not.
Without having it checked for codes, It is impossibe to answer.
Hi, You need to look on the steering column support to the left side of the dashboard or to the left speaker. The lamp can be reset by moving the switch up and then down. If the light stays on after you reset the switch, then there is a problem in the system. Good luck. Steve H.