on the transmission
check the reverse light switch and all connections
The 1997 Nissan Maxima. Reverse solenoid switch is located on the starter. The solenoid switch is attached to the side of the starter.
How to replace a clutch interlock switch on a 1997 Ford Ranger XLT
02 ranger
Remove the wiring harness from the back of your 1997 Ford Crown Victoria hazard lights switch. Remove the hazard light switch retaining screws. Reverse the process to install your new hazard light switch.
Either the reverse switch is defective or out of adjustment.
add a couple layers of tape where the switch hits the door jamb. the tip of the switch is worn down.
It's a matter of replacing the reverse position swith in the transmission. This switch tells the computer wheter it's in neutral, or reverse and when in reverse it triggers the reverse lights.
where is the backuo light switch in a 2001 jetta ?
locationof backup switch 1997 mustang
yes
There is a switch called the reverse backup light switch attached to the shifter. When you move the shifter into reverse, the switch is closed and current goes back to the reverse lights. The switch is located on both auto and manual trans. After making sure your bulbs are good, that is where I would look. And make sure your fuses are not blown as well in your fuse block. There usually is not just a circuit dedicated to reverse lights only but there is always something a manufacturer will do some years just to be different.