How to replace a clutch interlock switch on a 1997 Ford Ranger XLT
It doesn't have one, it has a switch on the clutch pedal. It also has an interlock switch on the dash, turn the ignition switch on and press the interlock switch and it will bypass the clutch switch.
Clutch interlock switch may be misaligned or faulty.
The interlock switch is to start the vehicle without having to press in the clutch. It took me a while to figure this out myself.
Inside of the clock or hood text 4434660178 for more
If you turn the ignition to the on position, and then press the interlock button, you don't have to press the clutch pedal down to start the truck.
Clutch interlock should only prevent you from cranking the starter without the clutch depressed. You should be able to push start with this malfunctioning since the rotating motor is doing just what it would be if the starter worked.
The clutch interlock switch is located under the dashboard and is similar if not identical to the brake light switch. you will find it where the clutch pedal extends to the furthest down position under the dash. It prevents you from starting the vehicle without depressing the clutch thus preventing starting up in gear, its a safety issue if someone is standing in front of you when you do it you will run them over, but if you need to just cross the wires.
This is usually known as a neutral safety switch or shift interlock switch.
where is shift interlock switch for ford exredition 1998
The clutch switch is located on the clutch pedal. Right at the firewall. Unsnap the electrial end and there is a peice of plastic if you pull the snaps loose slide it upwards and then just unsnap the switch off the pedal (bar) .
switch under dash on clutch is bad
The switch can be gentle tapped out with a rubber mallet