by the tank or evap canister
where is the canister purge valve located on a 03 chevy venture
The canister purge solenoid draws gas fumes out of the charcoal canister
On the Passenger side of the motor down by the wheel well.
The computer on the car purges the evap canister automatically by activating the purge solenoid.The computer on the car purges the evap canister automatically by activating the purge solenoid.
Remove the engine sight shield. Remove the evaporative emission (EVAP) line from the canister purge solenoid, perform the following: * Push the large size white retainer portion in. * Push down, while pulling up slightly in order the disengage the tube. Disconnect the EVAP canister purge solenoid electrical connector Remove the EVAP canister purge solenoid bolt Remove the EVAP canister purge solenoid and insulator Reinstall in reverse order....... toque spec is 91 inch lbs
The canister purge solenoid draws gas fumes out of the charcoal canister
I think it is on a horizontal frame member near the spare tire.
The purge valve on the Malibu is located on top of the charcoal canister that is mounted on the side of, or in close relation to the fuel tank. Usually on the same side as the filler neck. This purge valve is not to be confused with the purge valve solenoid which is located on the intake manifold. If for some reason you can not find the purge valve/canister just locate the solenoid on the intake manifold (which will have an electrical plug and one vaccum line attached to it.) and trace the vaccum line under the car to the canister. As stated above...it is there that you will find the canister purge valve.
on the top of the intake manifold next to the main injector
It is near the gas tank. You have to remove the spare tire to access it.
Its a Canister Purge Control Solenoid
Its a Canister Purge Control Solenoid